Automatic Labeler related introduction

The working principle of automatic labeler :
The process begins with the box being fed to the automatic labeler at a constant rate on the conveyor belt. Mechanical fixtures separate boxes by a fixed distance and push the boxes along a conveyor belt. The mechanical system of a labeling machine consists of a driving wheel, a labeling wheel, and a reel. The driving wheel intermittently drags the label belt to move, and the label belt is pulled out from the reel. At the same time, the label wheel will press the label belt on the box. An open loop displacement control is used on the reel to maintain the tension of the tag straps. Since the tags are closely connected to the tag straps, the tag straps must constantly start and stop.
The label is attached to the case with the label wheel moving at the same speed as the case. When the belt reaches a specific location, the tag belt driving wheel accelerates to match the speed of the belt, applies the tag, and then slows to a stop.
Since the label strip may slide, it has a registration sign on it to ensure that each label is placed correctly. The registration mark is read by a sensor, and during the deceleration phase of the band, the driving wheel repositions itself to correct any misplacement of the band.
The role of automatic labeling machine: improve the efficiency of product labeling and attaching, attaching position accurate, good quality, high stability; Avoid a series of problems such as low efficiency of manual labeling, skew of labeling, uneven thickness of adhesive and fold, effectively reduce the waste of paste, reduce labor cost of labeling, improve the appearance of product labeling, and enhance the comprehensive competitiveness of products.
Automatic labeling machine has the following advantages:
1, Wide range of applications, can meet the full circle labeling or half circle labeling, labeling between bottles is simple, easy to adjust.
2, The label recombination degree is high, label belt winding adopts a correction mechanism, the label belt does not deviate, the label position and inclination degree are adjustable in six degrees of freedom, no dead Angle adjustment, label recombination degree is high.
3, Intelligent control, automatic photoelectric tracking, nothing is labeled, no need to automatically calibrate and detect the label position.
4, High stability, the use of Panasonic PLC + Panasonic touch screen + subdivision stepper motor + optical fiber sensor electronic control system control, accurate control, sustainable long-time work.