How to repair the liquid filling machine?

How to repair the liquid filling machine?

   

We all know that people who don't care will be old, especially women, and they need care and maintenance. But do you know? In fact, the liquid filling machine is also in need of maintenance, if you do not pay attention to the maintenance life will be shortened, a variety of small problems will follow. In the event of a failure, failure to repair in time can be incalculable for the loss of production.

Therefore, regardless of whether your company has professional machine maintenance personnel, each machine operator should learn the basic maintenance and maintenance knowledge of the liquid filling machine. This is one of the things that can't be done without any harm. I believe everyone is willing to learn.

1. The liquid filling machine has a simple circuit and must not be inserted or removed at will.

2. When the cylinder is not returned due to improper operation, please press this button to reset it. Liquid filling machine equipment maintenance.

3. The liquid filling machine is set without power supply, and the normal air source is 4-6kg.

4. Do not rinse the unit directly with water when removing and washing the unit.

5. If there is overflow phenomenon in the injection nozzle, press the safety emergency stop switch to ensure the workshop is neat.

6. Before cleaning the piston filling machine, the remaining products should be cleaned, and then filled with soft cleaning liquid. The company recommends using warm water. Use soapy water, alcohol or other cleaning solution if needed.

7. The cylinder has been lubricated at the factory. Please do not open or add any lubricating oil.

8. The body of the automatic filling machine is made of stainless steel. Do not scratch the surface with a sharp sharp weapon.

9. When removing and disassembling the piston, remove the fixing screws at the same time to avoid affecting the process requirements of the other one when disassembling the first one.