What should be done if the crank of semi-automatic filling machine cannot rotate normally after starting up

The main function of semi-automatic filling machine is filling, less with other functions. Cylinder push rod piston adopts stainless steel material, corrosion resistance and wear resistance; Continuous speed adjustable, easy to operate. What should be done when the crank of the equipment cannot rotate normally?

1. When the upper fixed rod is tilted downward, the inner and outer tubes of the syringe are firmly pushed, so that the crank cannot be rotated. Loosen the nut, move the upper fixed rod upward to an appropriate position, and tighten the nut.

2. If the syringe is not clean and stuck between the inner and outer tubes during assembly, the syringe should be removed for cleaning.

3. The liquid injection system is loaded into the bearing part at the end. It cannot work properly and must be rebuilt.

This machine structure is simple, reliable, less failure; Adopt cone piston, good sealing performance, accurate liquid injection volume, easy adjustment of liquid volume; Contact parts are made of stainless steel, and easy to unload.